TPU PPF: Which Base Resin Series Should Your Shop Stock?
Almost every paint protection film sold to shops today is TPU PPF, so the word on the box tells you very little. What separates one TPU film from another is the resin it is built on, the adhesive, and the thickness, and those three set the warranty you can hand the customer. At HIGHCOOL each PPF series is named after its base resin: W for Wanhua, V for Covestro, E for BASF and L for Lubrizol.
That naming is useful at the counter. A shop that knows which resin sits under the film can price a job by warranty term, and a distributor can explain why two rolls of the same thickness are quoted differently. If you want the background on why the resin source matters at all, read our piece on how TPU suppliers shape PPF quality. If you are still weighing TPU against cheaper film, start with TPU vs TPH PPF. This post is the practical part: which series goes on which job.

The four base resins, series by series
The table below lists every standard and specialty PPF series we make, with the resin, adhesive, thickness and warranty taken from our quote sheet.
| Series | TPU base and adhesive | Thickness | Warranty |
|---|---|---|---|
| W15 / W17 | Wanhua TPU, domestic (Chinese) adhesive | 7.5 / 8.5 mil | 5 years |
| V15 / V17 | Covestro TPU, Ashland adhesive | 7.5 / 8.5 mil | 7 years |
| V19 | Covestro TPU, Ashland adhesive | 9.5 mil | 8 years |
| V23PRO | Covestro TPU, Ashland adhesive | 11.5 mil | 10 years |
| E15 / E17 | BASF TPU, Ashland adhesive | 7.5 / 8.5 mil | 8 years |
| L15 / L17 | Lubrizol TPU, Ashland adhesive | 7.5 / 8.5 mil | 10 years |
| V15MA (matte), V15BK and V15YBK (gloss black) | Covestro TPU | 7.5 mil | 5 years |
Two things stand out. Thickness does not set the warranty: W15, V15, E15 and L15 are all 7.5 mil, yet they carry 5, 7, 8 and 10 years. And only the Covestro line goes thicker, with V19 at 9.5 mil and V23PRO at 11.5 mil.
Why the adhesive is part of the grade
The Covestro, BASF and Lubrizol series are coated with Ashland adhesive. The Wanhua series uses a domestic Chinese adhesive, and that pairing is part of why W is the entry-price series in the range. When a supplier quotes you "TPU PPF" without naming the adhesive, ask for it. The adhesive decides how the film slides while you position it and how it lets go when the film comes off years later, so it belongs on the quote next to the resin.
Matching the series to the job
Here is where we would start a quote for the jobs shops ask us about most. This is our judgment from the warranty and thickness spread above, not a lab ranking of the four resins.
| Job | Series to start with | Reason |
|---|---|---|
| Dealer add-on packages, budget daily drivers | W15 / W17 | Cost-focused series with a 5-year warranty |
| Standard full-front and full-body jobs | V15 / V17 or E15 / E17 | 7 or 8 years at 7.5 to 8.5 mil |
| Rock-chip-heavy front ends, off-road and track cars | V19 or V23PRO | Thicker film at 9.5 or 11.5 mil |
| Premium full-body jobs sold on a long warranty | L15 / L17 or V23PRO | 10-year warranty |
| Matte or gloss black finish requests | V15MA, V15BK | Specialty finish, 7.5 mil, 5 years |
In practice a shop can run on two series, one price series and one long-warranty series, and order thick or specialty film per job. Thicker film also asks more of the installer on deep bumper recesses, so try V19 or V23PRO on a test panel before you sell it on a full front end.
What to check on the roll before you cut
Every roll carries its part number, batch and roll number on the roll core label. Copy that label onto the job ticket. When a customer comes back in year six with a lifting edge on the hood, the ticket tells you in a minute whether you installed a 5-year W15 or a 10-year L15, and whether there is a claim to make at all. Our warranty covers film defects (yellowing, staining, hydrolysis or film degradation). It does not cover installation issues or damage from use.
We test film in-house on a puncture tester, a water contact angle tester and a tensile tester, and each series carries its own written warranty terms. Our 13 PPF SKUs are stocked at our warehouse in Rancho Cucamonga, California, in 60 in x 49 ft (1.52 x 15 m) rolls of 245 sq ft, and 72-inch-wide rolls are also available. MOQ 1 roll, so adding a second series does not mean filling a shelf. Free A4 PPF samples ship from our US sample stock; you pay shipping only.
Send us the three jobs your shop does most and the warranty you sell today, and we will tell you which two series to start with and quote them within 12 hours on business days. Browse the full Paint Protection Film range, or ask for a TPU PPF series quote.
FAQ
What is TPU PPF?
TPU PPF is paint protection film built on a thermoplastic polyurethane base film, with a topcoat on one side and adhesive on the other. The resin, the adhesive and the thickness decide how the film installs and how long the warranty runs. In HIGHCOOL series names the first letter is the resin: W Wanhua, V Covestro, E BASF, L Lubrizol.
Does a thicker TPU PPF always carry a longer warranty?
No. Warranty follows the series more than the thickness. Our W15, V15, E15 and L15 are all 7.5 mil, with warranties of 5, 7, 8 and 10 years.
Which TPU PPF series has the longest warranty?
L15 and L17 (Lubrizol TPU) and V23PRO (Covestro TPU, 11.5 mil) carry 10-year warranties. The warranty covers film defects such as yellowing, staining, hydrolysis or film degradation, not installation issues or damage from use.
